Hi, I am in charge of finding all of the necessary DAQ equipment my group needs for a school project. We are setting up a test apparatus with various sensors including two type K thermocouples, a pressure transducer, a shaft angle encoder, and a load cell. We had our eye on the NI-USB-6210 DAQ, but we are not set on this if you can recommend a better one for our application. I need to know if we need any type of signal processing hardware such as amplifiers/attenuators, filters, etc to make this work with LabView. I have been doing some research, but this is my first time setting up a DAQ system and I'm starting to get really confused about what we would actually need for this setup. I have included pdf files of the data sheets for the encoder and load cell. This is the pressure transducer we selected: Pressure Transducer. And here are the thermocouples: type K thermocouple. There are two encoders, but we will only be using one or the other. Thank you so much for any help. We are trying to figure all of this out as soon as posssible and are on a really tight schedule.
↧