intermediate result display
Hi, I have an analog input task which slowly reads finite amount of data. I need to display intermediate results : request N pointsstart while all data not ready get what is ready (M pts) diplay...
View ArticleLoop powered device and NI 9265
I have been working with a cRIO 9023 with a 9114 chassis that includes the FPGA. On the chassis I have a NI 9265 4 chan 0-20mA output module. On the test bench I have wired in a Laureate Series 2 panel...
View ArticleUSB 6008 performing random resets
Hi all, We are using the USB 6008 to control two motors and acquire data from a number of motion sensors. We are controlling it with LabVIEW 2010 on Windows 7 on a laptop. Usually it works fine, but...
View Articlelabview fpga compile error
Dear colleagues, I am struggling with compilation of Labview FPGA software for sbRIO 9637. When I chose the local compiler option (installed on local PC), I get the following error message: "The...
View ArticleCustom Scaling Error 200077
Hello,I have a cDAQ-9188 chassis and seven modules. My VI consists of a DAQ-Assistant to acquire signals. With this I created a channel "Luftdrucksensor". For the Calibration I used a Custom Scaling in...
View Articlebnc-2110 compatible with x-series devices
is bnc-2110 compatible with x-series devgices ?
View ArticlePCI 6733/6713 Error with expansion
So I actually have the PCI-GPIB with the expansion chassis. The expansion is connected to a PCI Express to 4 slot PCI expansion System...
View Articlesignalexpress
Hello,I am new to NI environment, I found a NI USB-6259, I am going to use a PC to control it to generate anolog waveform. I should have a labview liencse, but I an not a good labview programmer. Can I...
View ArticleWriting a single analog waveform to pxi-6363
Hi, I want to write a fixed set of samples to the analog output and then stop. I am using C# but that isn't the important thing. I don't want a continuous signal. Lets say I have 1000 Samples /...
View ArticleClik here to view.
Encoder sampling at old clock speed
I’m having some trouble collecting points from the encoder on a USB 6221 board on Windows 7 x64 using NI-DAQmx 9.3.0. Here is a little bit of the background on what we’re doing. Our application creates...
View ArticleProblemas con tarjeta NI 9234
Buenos dias, tenemos 4 tarjetas NI 9234 , y modulos de adquisicion DAQ 9188 , 9171, 9191, dos de las tarjetas han presentado medidas solo de 60 Hz y armonicas (frecuencia de AC), que puede estar...
View ArticleDifficulty Getting Data from Load Cell to MAX
I have a load cell connected to an SCC SG24 attached to a NIDAQ board (the SC-2345). I have set up a Strain Virtual Channel in Measruement and Automation Explorer sooftware and am running the channel....
View ArticleSwitch Relay Control Deprecated? How to use NiSwitch to control more than 1...
How do we control more than one relay at the time (PXI-2569) using niSwitch? The former relay control from DAQmx that opened multiple relays is now considered as deprecated. Thank
View ArticleMAX on Windows 10
I haven't been able to find anymore information on this so I'm hoping the forums may be able to help.I have a Windows 10 Home PC that I am trying to install and run a labview developed program on. I...
View ArticlePCI-MIO-16E-4, NI 183139B-01 and SC-2050
Hi all, i have to work on an old machine but i have some problem to understand the pinout of this. My system is composed by the board PCI-MIO-16E-4 connected to a adapter NI 183139B-01 so i can exit...
View ArticleNI 6733 Not Recognized In MAX
I am having issues with getting MAX to see my PCI 6733 (and a 6713 as well). The cards use the BNC 2110 connector, so I have configured that. My first thought was the drivers. I installed the most...
View ArticleRecovering deleted devices in MAX
I am using a PCI device in MAX. It recently went unnoticed in MAX, but it showed up in the device manager. I saw a couple posts that I should just delete the device. So I did that. That did not...
View ArticleUsing multiple PFI inputs for a single trigger
Hi, I'm currently using an X-series PCIe-6323 multifunction card running on a Windows 7 PC. For this problem I'm programming in visual c++. I want to trigger an analogue output based on either of two...
View Articleanalog signals "simultaneously" USB DAQ 6210
Dear all, can I detect two analog signals "simultaneously' , using NI USB DAQ 6210 ?
View Articlestarting a read task, after a write-task was active, all lines (even outputs)...
Hi...i ve som problems with simple daqmx read/write.I'v got a DIO24 pci card (NI PCI-6503). the card has 3 ports by 8 bits, wich each can bi configurated as input or as output. When i start a read, i...
View Article