I want to log data from 15 channels and have a excel file with a colum with...
I'm doing it now with "Set dynamic attributes" but it is so Slow and I can not get the actual time. Thank you very much
View ArticleMount cRIO with magnets
I'm considering mounting 4 strong permanent magnets to the rear of metal cabinet that contains cRIO with 9236 card. Any concerns / experience with magnetic fields effecting the NI hardware or the...
View ArticlePXI 6115 64M CONFIGURATION
looking to buy a PXI-6115..the picture for the card shows that 4 daughter boards(p/n 187088F-01L) are missing as well as 32M boards? Is this the 32M version ? and the 64M version would have missing...
View ArticleUpdate on CAR# 242484
Hi, We had posted a question titled "BSOD blue screen crash if a task containing simulated devices is explicitly committed" to the discussion forum in 2010 and got assigned a CAR# 242484 for the...
View ArticleDown loaded trial Daztlab13 but can not get it to find my MCC USB-1208FS.
I downloaded the trial Dasylab 13 but I can not get Dasylab to use my mcc USB-1208 unit it always loads the sound Card and i do not see any option to change it.
View ArticleMATLAB example for NI PCI-6221 and BNC-2110 boards
Hi, all! I have two boards from National Instruments: PCI-6221 and BNC-2110. Using this equipments I need to read the analog voltage data and write analog voltage to the BNC-2110 board's pins in...
View ArticleNI USB DAQ card ghost readings
Hello,I have a question concerning the behavior of the NI USB-6218 DAQ card. Right now I am using Labview to take multiple current readings from different AI channels. I am using 250 ohm resistors...
View ArticleHow to set a timer for a function call
Dear friends, Suppose I have to read digital channel output from the hardware connected to my UI for every 100msec. Is there a way so that I can create a timer for it?By the way I am using the below...
View Article+/-10V analog input myrio
Dear All,I am using myrio and it has two +/- 10v differential analog input on connecter C and 4 0-5V single ended anolg input on connectors A and B. My application has three sonsors which ranges from...
View ArticleDAQmx Base 15 C API on a Mac and Onboard device memory overflow [-200361]
I am developing a data acquisition application on a mac using NI's C API from the DAQmxBase 15. I'm getting data from 2 channels with 1000 Hz sampling rate and after random amount of time I'd get this...
View ArticleClik here to view.
System.IO.FileLoadException in examples
Hi, I downloaded the lastest Ni-DAQmx software, and when I try to test any of the .NET examples I get this error (System.IO.FileLoadException): I checked the directory and I have all the files: I'm...
View ArticlecDAQ 9133 12" MONITOR BLANK
cDAQ 9133 running embedded windows 7 and a NI 12" monitor connected to monitor port is blank after coming out of sleep mode. cDAQ 9133 has status LED blinking yellow, press reset button, status light...
View ArticleNI-DAQ USB 6241- Acceleration Signal
HelloI have an NI-DAQ USB 6251, I want to measure the signal from a Bruel & Kjaer accelerometer (4508). I can't I measure the output directly with the analog input to the NI DAQ.The DAQ doesn't...
View ArticleDAQ module (NI PXIe-6363, PXI): individual triggers for concurrent but...
Dear NI-DAQ experts, We use a NI PXIe-6363 DAQ module in a NI PXIe-1082 PXI chassis and a NI PXIe-6544 HSDIO module to generate the backplane triggers (to be received by the DAQ). LabView 2015 (32bit)...
View ArticleProblems maintaining digital output while doing DAQmx Read on NI 9401
Hello, I'm using an NI 9401 for digital i/o as part of a cDAQ-9178. I have a normally-closed relay attached to one of the lines, so I need to constantly send it a signal to keep it open. I also have...
View ArticleUnable to add networked cDAQ-9184 to NI MAX
Hello, I'm facing a rather odd situation: SetupI have 2x cDAQ-9184 chasses on my local network, both with exactly the same C-series modules plugged inMy laptop has NI MAX 14.5 and NI-DAQmx 14.5...
View ArticleScanner (galvanometer) position detector
I have find CamTech 6215 scanner datasheet, here is it:...
View ArticleHow to set the output counter channel to generate a pulsed signal using DAQ6008
Hello there I am trying to generate a pulsed signal of 100Hz with a 20% duty cycle from the DAQ 6008 using visual studio 2013. I have the code that should generate this but I am unsure on how to set...
View ArticleNI 9215 Voltage measurement in a welder problems with noise
Hello, I am currently using a NI 9215 with screw terminals to measure voltage in a MIG welder, also I am using a voltage divider to reduce the magnitude of the voltage to fit in the measurement range...
View ArticleClik here to view.
Analog Output with Counter Falling Edge
Hello All, Here's the iamge that describes what like to accomplish. I would like to trigger the AO outputs with the Falling edge of the counter. I have set the Clock for my AO as the Counter. The...
View Article