PCIe-6363 on Linux
Dear all, I'm interested in purchasing a PCIe-6363 to generate analog waveforms at high sample rates (e.g. > 1 MS/second). The machine in which I intend to install the board is running the latest...
View ArticleSimultaneous use of DO and AI on SCB-68
Hello! My name is Alexandra. I am trying to make my first device using labview. I'm using NI PCI-6221 and SCB-68 board. I need to measure an unknown resistance. I've made a voltage divider which must...
View ArticleNI-9217 RTD Sampling Speed, High-Resolution vs High-Speed
Hello. I am using a NI-9217 RTD module in a CDAQ-9178 chassis. What is the difference between High-Resolution and High-Speed on the NI-9217? In my setup, I am sampling all four channels and realize...
View ArticleUSB adaptor for PCMCIA 6024E card
Of course i can realize you are finding it difficult to suppress a smile - yes i do have this 6024E DAQ card . Kind of a dinosaur in comparison with the new gen stuff. But then its in good working...
View Articledifferent Daq devices with 64/128 channel with sampling rate of 200 ksps per...
I need a Data Acquisition System system with 128/132 channels (or 64 channels) ,simultaneous sampling at the rate of 200 ksps/ch or more with 500k/1GB memory and PCI/PCI 104 connector. Also An...
View Articlelow cost alternative of DAQ system 16/32 channel with sampling rate 200ksps/ch
Kindly suggest some low cost alternatives of NI.
View ArticleWindows 10, USB 6009, and NI DAQmx base
I'm having an annoying issue that started when I upgraded a machine from W7 to W10 and trying to get a USB-6009 to work under MX base (v15) on a computer that has both the full and the base versions of...
View Articledaqmx: Output analog signal and digital counter with varying frequency...
Dear all, DAQmx provides a nice API to output a sequence of samples to one or more analog outputs (DAQmxWriteAnalogF64) and digital counters (DAQmxWriteCtrTicks, DAQmxWriteCtrFreq). I'm am wondering...
View ArticleUSB 6000 Digital I/O lines direction and status
Hello, I have just bought an USB 6000 and I am trying to read some Voltage values from the analog output through Labview.I created a Task and I can read the values as I want, but I have a problem with...
View ArticleDAQmx Acquire real-time data from analog input channel and send acquired data...
Hello! I am new in Labview for data acquisition.I have a NI USB 6259 DAQ (Labview Ver-2011).I need to create DAQmx task that will continuously acquire data from (ai-0) and send that acquired data, as...
View Articlepower supply to cdaq 9136
Hi,I have connected a dc power supply (24VDC) to my cdaq 9136. It's not powering on. Am I missing something?I also found no tutorials on getting started with cdaq(regarding wiring, power supply etc)Any...
View Articledaq connection
can i connect the output pins of rotary encoder E50S8-360-3-T-24 to NI 6008 daq ?
View ArticleClik here to view.
External Sample Clock with 2 sources
Hello, I have the following HW and SW:PCIe-6351Rotary encoder - Signal A connected to PFI6 and Signal B connected to PFI5Torque sensorLabview 2015DAQmx 17.0 My Problem:I want to use an extenal signal...
View ArticleClik here to view.
DAQ Grounding
Hello,i have a question about DAQ grounding.I use NI 9215 BNC + NI 9181.Using the ground screw on the side ---> NI 9181 is grounded.Because NI 9215 is connected to NI 9181 with the 15-pin D-SUB...
View Articlefailed to read PWM signal generated by LabVIEW and DAQmx
Dear all, I'm a beginner of Labview and DAQmx. I create a simulated NI PCI-6225 device and a virtual channel by using DAQmx. I want to use the counter of PCI-6225 to generate PWM signal, then display...
View ArticleNI myDAQ error -200284 using Bode Analyzer
Hello, I'm trying to use the Bode Analyzer from the NI ELVISmx Instrument Launcher to analyze a circuit I built. However, I receive an error stating that the samples I have requested have not yet been...
View ArticleSimultaneous triggered read of analog and digital inputs
I am trying to write a DAQmx program (C#) that reads in a set number of points from various analog and digital channels from a PXI multifunction DAQ card. I want to start the acquisitions on the same...
View ArticleIEPE microphone
I want to buy microphone for fault detection of rotating machinery. but I do not know that I must buy array microphone or free field microphone.please help mewhat kind of microphone is suitable for...
View ArticleHow to connect thermocouples to NI DAQ USB-6225?
Dear all, I am trying to connect some thermocouples to my existing NI DAQ USB-6225. The thermocouple is Type K probe see the link: https://www.mcmaster.com/#thermocouples/=1ajggrg I am wondering if it...
View ArticleWhat DAQ System?
Hi Guys,I'm looking to purchase a DAQ system for the attached piece of equipment. What would be best?
View Article