usb-6009 reference trigger using loops
Hi, I am a student studying for a Beng. As my final project I am looking to create a fault recorder for electrical motors. The basic premise is that it sits and waits for a trip signal, at which point...
View ArticleAdventech, DAQNavi
Does anyone using Advantech, DAQNavi (USB-4704) ActiveX driver in Windows/CVI ?I'm having communicate problem with Advantech, DAQNavi ActiveX driver. When I call a function, it return an exception error .
View ArticleUSB-6009 OEM Firmware Update Question + OEM Drivers Workaround
Hello Everyone, We are replacing a large number of NI USB-6009 OEM interfaces from our devices and retiring/repurposing them. As we test the boards after removal, our test systems recognize them right...
View Articlepressure transducer and USB-6210
I am trying to setup a USB-6210 to read pressure transducers (specifically: http://www.omega.com/pptst/PX309-100mv.html), with labview2013.Its a fairly simple task, and it should not be this hard...I...
View ArticleConnect microphones to NI myRIO
I need connect 7 microphones to NI myRIO, it is possible ussing the I/0 analog?
View Articleglobal scope of a DAQmx task
Hello all, I create and start a DAQmx task inside a dll. The dll is called from TestStand. After starting the task (so inside the dll) I call the "DAQmx Save Task.vi". I see that the task appears in...
View ArticleSCXI 1303 for voltage measurement
I have two capacitive pressure sensors from INFICON with different measurement ranges. The output of these sensors is in voltage. I connected both to the same power supply, which is grounded. For the...
View ArticleSimultaneous Digital Waveform Output at Different Frequencies - cDAQ-9174...
Hello, I am working on a project that requires two digital waveform outputs at different frequencies. Wave 1's frequency is about 1 kHz and is modulated on and off at a rate that will change during the...
View ArticleInstalling NI-DAQmx Core Runtime 9.7.5 In Windows Embedded Standard 7
Hello, I am trying to install NI-DAQmx Core Runtime 9.7.5 in Windows Embedded Standard 7, however when I attempt to install it I receive the error message: "The "NI-DAQmx Switch Core 2.5.1"...
View ArticleNImax
Hi all,I'm using NI 2012 version, also a new bird and would like to know which NIMAX version I should download and use?
View ArticleSelf-Test C# API
I am interfacing to a NI USB-6361 and a NI USB-6525 using the C# API. I would like to build into my application a diagnostics function to test each DAQ, and I was thinking I should perform the same...
View ArticleUSB-6211 + LabView for automated tests?
Hi there, My company is currently setting up automated testing for our PCBs in the factory, and we're trying to figure out if an NI DAQ such as the USB-6211 would be suitable for our needs. Our test...
View ArticleRTD data acquisition
Hi, Our lab need to conduct really accurate measurements of temperature differences (between 1 and 2 °C) We have installed RTD sensors in 1/10 din class (accuracy lower than 0.08 °C at our...
View ArticleI want to get the angular position by cDAQ
Hi every one,hope this message reach all of you in good health,I have cDAQ-9188Analoge input ni 9201gyro sn-imu5d-lc...
View ArticleDigital inputs to analog output using NI-6009
Hi Guys,Any idea if I can use NI-6009 as a digital to analog converter. In my application, I am generating 12 bit digital data from FPGA and I want to convert this to analog value to display it on...
View Articlesolution for inconsistent ip settings while configuring ni cdaq 9191?
Hi, We are facing the above problem when we connect NI cDAQ 9191 to the PC via ethernet cable. Please kindly reply to this as soon as possible. Thanks
View ArticleConvert analog data to array
I'm using the sbRIO Eval Kit and I am trying to perform various signal processing functions on some of the analog input signals. At pesent, the signals "stream" into the RT processor from the FPGA and...
View ArticleConverting Two PCI 6221 to One PCIe 6323
I am upgrading lab computers, and the new ones only have 1 PCI slot. The old computers had two PCI 6221 cards in them so I will be switching over to one PCIe 6323 to replace them. I am using one...
View Articlesensitivity of DAQ 6281
Hi everyone I have the DAQ card NI 6281 and I want to obtain analog voltage signal in the range of mV (0.001V - 0.010 V) . I would like to ask you is it possible to receive the signal in the...
View Articledigital start ref trigger for analog input with another task (DaqmxBase)
Hello, I am using the C API of Daqmx Base with a 6212 USB. I can successfully create analog input task with a digital start ref trigger.I can successfully create a counter output or a analog output....
View Article