Sensitivity/resolution NI DAQ
Hi, I have trouble understanding the Sensitivity value in the product specifications multifunctional DAQ-devices. For example in the specifications of USB621x-devices on page 4 it is stated that for...
View Articletemperature sensor with usb-6009 daq
Greeting i want to use a temperature sensor with usb-6009 to record the variation of a body temperature within about 15 min,then use the data in labview. if you please can advise me with the best...
View Articlehow to do DAQmx synchronization with multiple devices
Hi, I am new in Labview. I need help to: 1. modify a multi-function program in order to record data from three daq cards (devices 1-3) and output signal through one of the card (device 1). The current...
View ArticleWireless DAQ
I have NI c Series Wireless Chassis and 9219 module. How can I connect it with my Desktop PC?(what type of wireless communication device is required? and is it available in any local marcket? )
View Articleunable to add the network device
HiI am facing problem to add the network device.In max window, when i search for the connected network device , it automatically recognises NI DAQmx-9191 but the button to " add the selected device" is...
View Articlepoapoaspow
watch Oculus onlinewatch Draft Day onlinewatch Watermark onlinewatch Hank and Asha onlinewatch Cuban Fury onlinewatch A Fragile Trust: Plagiarism, Power, and Jayson Blair at the New York Times...
View ArticleNI-DAQmx Error Modul_ad.c
Hello all, I'm trying to record an acoustic signal in Dasylab 10.0.1 with the NI-DAQmx 6210.System: Windows XP SP3Board: NI-DAQmx 6210 with USB MAX configuration:Sampling rate: 32768Samples:...
View ArticleUSB-6212 install error, Data Invalid
Hello, I am trying to use a USB-6212 with LabVIEW 8.5.1 and DAQmx 8.7.1. When I plug the USB cable in I get the usual prompt to install the drivers for it. But I get a message that says "The data is...
View Articleweb server
dear alli am trying to publish my vi on network . it is working on my PC but when i see on network it does not show image of my viplease help me
View ArticleLooking for Help! PCI 6723 output a wrong voltage
I am using a PCI-6723 card for analog output.And I set the output voltage to 1V with a 50Ω load, but the voltage of the load is just around 0.38V.I tried to increase the output voltage of the card to...
View ArticleNI 9205 in a task; error -200077
I'm trying to set up a task for reading all 16 differential channels on a NI 9205.I get an error -200077 when I get to adding channel8 (starting counting on zero) to the task, almost as if the...
View ArticleImplementing Microsecond Precision with Windows OS
I am trying to develop a program that can deliver signals to at least 10 digital output lines. The signals require precision in the range of microseconds. I am currently trying to develop this...
View Articledata
Hello, I am fairly new to labview and programing. My goal is to acquire retinal potentials, The signal I obtain is accompanied with noise and is in micro volt range, my goal is to average out the...
View ArticleClik here to view.
DAQmx Physical Channel and turning off "I/O Name Filtering"
How can I do this under LabVIEW 2011 ?In the window that pops up, I get the impression that there will always be an active filter,see screendump below.But if I in the diagram checks available...
View ArticlecDAQ-9188 SDK
I have this device with model number cDAQ-9188 and I am looking to interface to it so I can save the data to database. I was wondering if there was a SDK to interface to it via TCP/IP. Thank you.
View ArticleNI 6009 with C++ programming
How can I use NI 6009 usb with my C++ code and Ubuntu OS...???
View ArticleDAQ 6255 time interval accuracy
I am trying to determine the timing accuracy of a measured time interval using the 6255 DAQ with an A/D differential signal on 1 channel. The sampling rate is 1.25 MS/sec. The specifications state the...
View ArticleNeed to generate +-5V square/bipolar analog output using 4 channel outputs...
I am using a USB X -series with 4 analog outputs channels. I am trying to generate 4 square waves from 4 different channels. Please see attached image for detail. I am fairly new with LabView
View ArticleMultifunction DAQ setup for plasma arc deposition pulse signal control
Hi all.I'm aiming to set up a fairly simple control logic for plasma arc PVD deposition reactor with 2 separate pulses of separate species (2 separate signal outputs control a capacitor bank that...
View ArticleProblem with Pressure Transducer and NI 9205 with NI 9263
I have a bridge based pressure transducer with a range of 0 - 5000 psi and requires a 10 V excitation. The output is 3 mV/V. I have connected it to a cDAQ with a NI 9263 providing the 10 V excitation...
View Article