NI-USB6001 and NI PXIe-8360
Hello, I am using NI PXIe-8360 along with PXI-2571, PXIe-6341, PXI-2720, PXI-8433/2 and PXI6722 (Chassis - NI PXI-1062Q).And I need to use "NI-USB 6001" for other test purpose. Before installing...
View Articlesynchronous acquisition 2 channels with different signal amplitude
Greetings, I'm having some issues with my VI. I'm using NI-DAQ 6212 and I'm trying to acquire 2 different signals (ECG with 1mV amplitude and Respiration with 100mV).When I'm using a VI that only...
View ArticleClik here to view.
Using PCI-6221 Digital Output to perform GMW 3172 Nov 2012 Section 9.2.18...
Greetings all! So glad I figured out how to post my question... I am trying to program a simple digital waveform out a PCI-6221 or PCI-6132 S Series, the timeing for this in the micrseconds. Problem...
View ArticleClik here to view.
Problema con tarjeta cDAQ-9171 no detectada
Yo trabajo utilizando termopares conectados a una tarjeta de adquisició de datos cDAQ-9171, con ayuda de Labview y el driver DAQmx. Recientemente he notado un problema, cuando desconecto mi tarjeta del...
View ArticleNIDAQmx documentation in PDF format?
Hello all, Is the NIDAQmx documentation available anywhere in PDF form? Specifically, I am interested in the "NI-DAQmx C Reference Help", which is by default only installed in "Windows Help" format. I...
View ArticleNI-DAQmX Hardware Synchronization for 2 module NI-9223 !!!
Dear All I am using NI-cDAQ 9184 and 2 Module NI-9223(1M) to acquire 6 channels analog input from Acoustic Emission sensors(frequency from 20kHz-400kHz) with external signal conditioning.Please kindly...
View ArticleUSB 6008/6009 DAQs will not work in series with external usb hubs
We need to control about 6 or 7 usb 6008s or 6009s. We have a few of each. The DAQs will not turn on when plugged into the usb hub we are using. I have tried different computers (both quite old and...
View ArticleClik here to view.
Average of a analog Input Signal with Visual Studio (without Measurement Studio)
Hello, I got a Signal in my NI USB 6009 analog input. Now I have to average this Signal and send it to the analog output. I continuously aquire the signal. The Signal in my input looks like the...
View Articleerror 200524
Hi all,I met error 200524 when using the DAQ assist. The rate is 2KHz and the sample to read is 200. I transfered the sensing data to 1D array for a PID algorithm and transfered the 1D array back to...
View ArticleCompaq DAQ Square wave analysis
Hi I am using a CDAQ-9178 with NI9229 4 channel 50 kS/s analogue card. I have fed in two independt square wave signals that are 90° out of phase. The two signals are below 20hz. The sample rate is set...
View ArticleNI 9222 Amplification
I have the NI-9222 module connected to a cDAQ-9174 chasis. Connected to the module is a piezoelectric sensor, which produces a voltage signal. Oscilloscopes and multimeters read the output voltage of...
View ArticleSynchronize NI9234, NI 9203, and 9237 at 200 Hz
For a research project, I am preparing an acquisition system based on a NI CompactDAQ (NI cDAQ 9184) with NI 9234 (4 accelerometers), NI 9203 (4 current sensors), and NI 9237 (4 strain gages). The...
View Articleerror 201003 cDAQ startup
Hi forum, i got a error massage error 201003 while starting my application. The application is in the startup folder as soon i start up its not running and i get the error massage. When i close the vi...
View ArticleUSB-6009 Simultaneous Software Timed Analog Output/Input
Ladies and gents, I have been working on a LabVIEW interface for a potentiostat I designed and built. I am not very experienced with LabVIEW, but do have programming experience with a variety of other...
View ArticleHow to measure 12V input frequency signal on AI pins of USB-6009
Maximum voltage that can be connected to analoginputs is from -20 V to 20 V (card specificationsMaximum voltage that can be connected to analoginputs is from -20 V to 20 V (card specificationsMaximum...
View ArticleConnect myRIO to NI USB DAQ Board
Hi, Is it possible to connect a NI USB DAQ board, specifically NI USB-6212, to NI myRIO? I am working in a project which needs more analog /digital inputs and outputs. Theoretically, the USB DAQ is...
View ArticleMulti channel pulse generation with NI-DAQmx
I'm new to using DAQmx, so forgive me if I'm barking up the wrong tree.I am trying to generate a multi-channel pulse sequence using counter outputs on a PCI6602 with the BNC-2121 accessory. Eventually...
View ArticleAnalog input current port for BNC 2110
HI, I am using BNC-2110 as an interface to connect to PCI 6280, I checked this interface card. I wonder if this curd can be used for measing input analog current (I mean directly). Does it accept...
View ArticlePyDAQmx and USB-6000/USB-TC01 Thermocouple Device
Hi All, I have a project I'm working on which requires reading values from a circuit board. Need to do these things:1). Read five analog values from test points on a circuit board with USB-6000 DAQ...
View ArticleProblem with Connection Diagram - BNC 2110 to PCI 6280
Hi, I want to read analog input data using BNC 2110 as an interface connected to PCI 6280. In first step I want to use Signal Express to just see the data, but when I choose one of the input...
View Article