Clik here to view.
How to use the NI USB-6210 on linux
We're trying to get a USB-6210 working on a current and updated linux, and have been so for a few weeks now We have tried with a Scientific Linux 7.5, installed libnidaqmx{,-devel} and ni-visa{.-devel}...
View ArticleCan I replace PCI 6133 with PCI 6132?
Can I replace PCI 6132 to my equipment currently use PCI 6133? Thanks
View ArticleTimestamp for frequency measurement of DAQ chasis NI9871 and unit NI9421
HiI'm using chassis NI 9178 and unit NI 9421 and signalexpress. And I have a RPM sensor which output digital signal (pulse train), I would like to know the frequency of the signal. I used acquire...
View ArticlePXIe-6368 Trigger signal question.
Hi!I am using PXle-6358 daq.This daq is installed in PXle-1073 and two SCB-68A are used for simultaneous multi-channel measurement.I try to collect data by receiving a trigger signal on this daq.I am...
View ArticlecDAQ Chassis Power C Terminal
Hello, The user manual for the cDAQ-9185/9189 Chassis says on page 10 that "the C terminal is not connected to chassis ground," referring to the power supply connector for the chassis. This same...
View ArticleModbus Data acquistion
I want to swap the 32 bit integers to get swapped float values, anybody can help me,thanks....
View ArticleUSB-6001 replacement
I hope you're able to help me. I'm not a LabVIEW engineer or anything I look after our database and various business software.Our company bought a test system which uses a USB-6001 and unfortunately...
View ArticleUnable to build installer LV16
I started by attempting to build an executable as I have a cDAQ 9133 that is nearly out of C: drive space when it's required to run both Windows and LV16 with the DAQmx drivers. I kept on getting the...
View ArticleFrequency resolution of analog out card
Hi ,I am using PXIe 6738 analog out card . I m trying to generate different sinusoidal waveform frequencies with the help of this card. I want to generate frequency in the resolution of 1 Hz for...
View Articlepci 1200 Alternative on windows 10
We're upgrading an old machine that runs Windows XP NI-DAQ 6.9.3. The drivers for our PCI 1200 pci card are not compatable with windows 10. Is there an alternative for this card that takes the same...
View ArticleMax Calibration on a Standalone Executable
I have cDAQ 9133 being used to control an engine test cell. It only has 15GB of C:\ drive space, which means it's not enough to hold Windows 7 embedded, Labview Development Suite and the DAQmx drivers....
View ArticleClik here to view.
Activación de salidas digitales de Vernier SensorDAQ con NI DAQ MX Python
Hola a todos. Estoy haciendo una aplicación con la Vernier Sensor DAQ para controlar temperatura en una mini cámara cerrada con el LM35 y un foco luminoso o bombillo como actuador.Para activar el foco...
View ArticleClik here to view.
Vernier SensorDAQ digital outputs activation with NI DAQ MX Python
Hi everybody. I am making an application with the Vernier Sensor DAQ to control temperature in a closed mini-chamber with the LM35 and a light bulb as an actuator. To activate the light source, I need...
View ArticleNI USB-6341 getting disconnected to windows intermittently
Hi.I would really appreciate any technical insight regarding my issue.I have a NI-USB 6341 connected to an Analyzer via a windows 7 PC.It intermittently disconnects and causing issue with my...
View ArticlePCIe6321 5V power lines
Hi, I am considering to use the 5V power lines (1A max) of PCIe 6321 board to feed some glue logic. What I am curious is if the 5V power lines are linear regulated one or just directly connected to...
View ArticleUsing USB 6002 DAQ to generate waveform using digital output
I am using USB-6002 DAQ multifunction to generate waveform by using digital output. Is it possible to generate a signal using digital output?
View ArticleMAX not seeing PXIe-4300
Greetings,The PXIe-4300 cards are not seen by MAX. After DAQmx 9.7.5 is repaired, the cards are then recognized and the tasks work fine. After restart the problem re-occurs until DAQmx is repaired...
View ArticleNIDaqmx (NI-PXIe-6363) Python: register signal event
Hello , We are using an NIDaqmx (NI-PXIe-6363) with Python. We try to register an digital input as trigger source to an task. Code snip : self.myTask = nidaqmx.Task( new_task_name='digital line event...
View ArticleGenerate and Control square wave by using USB-6002
I want to design a hardware that I press a start button then TRIG signal is generated at rising edge and when I press stop button then RST signal is generated and also turned off the TRIG signal.Kindly...
View ArticleUSB-1616HS-4 shows voltage on digital input
First Post:I have a USB-1616HS-4. It shows 3.3v on pins C4 and C5 which are configured as digital input and with nothing connected to those pins. C0 to C3 and C6 to C7 do not show a voltage value....
View Article